milsdodge
Member
Had this engine since 1983. It is a 340 out of a AAR Cuda cast in side TA 340 6. Casting date of May 5 1970. Looks to have stock 340 heads,not the ones with the off set push rods. Wondering what it is worth.
TA 340 block
- Thread starter milsdodge
- Start date
- Local time
- 5:53 PM
- Joined
- Aug 23, 2012
- Messages
- 2,157
- Reaction score
- 3,103
- Location
- Cornfield County SC
AAR's were made the month of March and 2 weeks in April. Must have been a left over block.
the mississippi madman
Well-Known Member
If it's a 6pack 340 it's one of the best mopar motors ever made
JMILL67
Well-Known Member
Does it have a VIN stamped? Pics of the casting numbers? Condition of the block means everything. Standard bore, no sleeves, not cracked or repaired, sonic checked... maybe the AAR is still out there?
BeepBeepRR
Well-Known Member
Its worth scrap price.. But Ill give you double just to help you out. 
- Local time
- 5:53 PM
- Joined
- Aug 23, 2012
- Messages
- 2,157
- Reaction score
- 3,103
- Location
- Cornfield County SC
If it was cast in May of 1970 it was never in an AAR. They stopped production in April. They made more Blocks than cars. Some were even put in 71 cars I think.
milsdodge
Member
Bought two AAR Cudas 1983 one was wrecked bad. This is the engine out of it, car was scraped.
milsdodge
Member
Will try to get in shop loft today and get a picture. Not sure where to look for serial #
- Local time
- 5:53 PM
- Joined
- Aug 23, 2012
- Messages
- 2,157
- Reaction score
- 3,103
- Location
- Cornfield County SC
Bottom right side a flat pad just above the oil pan and just behind motor mount.. Should start with 0B.
Similar threads
