• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Here's a few new Aluminum carve designs I'm working on...renderings.

Leesrt

Well-Known Member
Local time
3:14 AM
Joined
Nov 8, 2014
Messages
142
Reaction score
535
Location
Willows, CA
One of several new plaque shapes I'm working on plus some new designs.

PENTASTAR 1968 CHARGER NON RT 4.jpg PENTASTAR 1969 LEESRT CHARGER RT V21 F6 REV3 2.jpg PENTASTAR 1969 LEESRT CHARGER RT V21 RED REV3 2.jpg PENTASTAR 1969 LEESRT CHARGER RT V21 B5 REV3 2.jpg 1966 CHARGER FRONT ANGLE VIEW BLACK CARVE 1.jpg 1966 CHARGER FRONT ANGLE VIEW GREEN GREEN TOP 1.jpg 1966 CHARGER FRONT ANGLE VIEW RED WHITE TOP 1.jpg 1966CHARGERREAR4_485COASTER.jpg 1967 CHARGER FRONT ANGLE VIEW BLACK CARVE 1.jpg 1967 CHARGER FRONT ANGLE VIEW BLUE WHITE TOP 1.jpg
 
Can you make those into key ring tags? What diameter are those?
 
I like them

Need some 68 RR's especially & 69 or 69.5 (even 70)
& GTX's :poke:
 
How about one with a 69 Super Bee?
 
Can you make those into key ring tags? What diameter are those?
I have key fobs that are 2.1" in diameter and 3/16 thick. Some of the fine detailed images may not look good on that small of a round, but I can try some. These are coaster size that I'm showing, 4.485" diameter and 5/16" thick with a hole to hang them and 3 powerful rare Earth magnets in the back so you can stick to the fridge.
 
I have key fobs that are 2.1" in diameter and 3/16 thick. Some of the fine detailed images may not look good on that small of a round, but I can try some. These are coaster size that I'm showing, 4.485" diameter and 5/16" thick with a hole to hang them and 3 powerful rare Earth magnets in the back so you can stick to the fridge.
I think your onto something thats really cool. I like what I see .
 
Nice work Lee!
Thanks for the compliments. I have lots of designs to finish...long ways to go. I sure hope this takes off. I can see these designs on custom air cleaner lids, valve covers, wheel caps, or whatever you want.
 
How big can you make them? I would think if you can get up to 14 - 18" or so a lot of people would buy them for garage wall art, myself included.
 
Here's my first attempt at colorizing one of my Aluminum carvings. The process needs a little fine tuning, but the effect is what I wanted. The next ones should be a little smoother in appearance.

COLORIZE TEST 1sm.jpg
 
Very cool. I agree with Hunt, these would be great for garage art.
 
Auto Transport Service
Back
Top