• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB '67 Coronet "air shields"

Status
Not open for further replies.

rod440

Well-Known Member
Local time
8:15 AM
Joined
Jan 9, 2017
Messages
75
Reaction score
74
Location
Neenah,Wi
Feedback: 0 / 0 / 0
I'm looking for a nice pair of the black plastic shields that mount to the top of the front bumper brackets for my '67 Coronet.Thanks! Rod in Wi.
 
Can't post a photo right now,but they are kind of rectangular shaped & the edges are "curled up" They measure about 17 x 8".The part #'s on them are 2533607 lt & 3533606 rt. I'll try to post a photo tomorrow.
 
Ok see if you can get the picture I probaly have what you’re looking for
 
jrbn77.jpg
 
They're riveted to the top of the bumper-arms. Probably holes from the rivets, where they were.
 
I would think that a narrow splash shield that was behind the bumper and all of the way across would be better.
 
Thanks for the replies,I cleaned out my inbox.
 
After checking out my parts I realized that I really only need the LH side.
 
On Chargers the 66 had metal “splash shields” and 67 had plastic. I am guessing Coronets were the same. Mine (67) had a self tapping screw.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top