67 satellite vent window questions.

1967 satellite · Jan 19, 2019

Where can I get the vent window run weatherstripping that goes into the back side frame of the vent window? Or can anyone tell me the correct size.
I also need the glass channel seals that goes into the run. Classic industries is out of stock on this part till the end of Feb.
Thanks

66383 · Jan 19, 2019

Try MrMoparts in Arizona. By the way what size wheel and tires are on your car and backspacing. Looks really great.

joerachet · Jan 19, 2019

Here is one that I have, would have to look for the other side

69L48Z27 · Jan 19, 2019

I think he’s looking for the glass run channel that the door glass rides up and down in.

Try Mega Parts. The ones I used are Mopar ones I found on eBay. I think Mopar still makes them, I don’t believe they were NOS.

joerachet · Jan 19, 2019

Right, let me look

1967 satellite · Jan 19, 2019

69L48Z27 said:
I think he’s looking for the glass run channel that the door glass rides up and down in.

Try Mega Parts. The ones I used are Mopar ones I found on eBay. I think Mopar still makes them, I don’t believe they were NOS.

Correct, I need the one the glass rides on approx 36" long. I'll try mega parts thanks.

1967 satellite · Jan 19, 2019

joerachet said:
Here is one that I have, would have to look for the other side

View attachment 707572 View attachment 707573

I have these. I need the ones 36" long the glass rides on.

69bfan · Jan 19, 2019

The mylar glass channel runs that are attached to the front of the door glass that fits inside the stainless trim is only now available in the reproduction form. Finding NOS ones are getting very difficult and not uncommon to bring up to $300 each. Both of the reproductions and originals are fragile, but the reproductions are even more so. You will have to trim to length as they are made to fit various applications even from the factory. Other than the flocked mylar run and the the vent window seal, that takes care of the vent window assembly except for the rubber bumper that sits atop the vent window frame and they are not reproduced to my knowledge.

VFilms · Oct 26, 2021

If you are speaking about the mylar channel that attaches to the leading edge of the door glass, I repaired my original parts. Here's a thread I posted. https://www.forbbodiesonly.com/mopa...de-restoration-attempt.207311/#post-911750414
You can get new replacements BUT they need quite a bit of modification. They are not contoured to the curvature of the window glass causing them to bind and the plastic retainer clips have to be altered - sanded down.
As you will see I re-flocked mine and they work perfectly.

AR67GTX · Oct 26, 2021

I bought the reproductions from Detroit Muscle recently. They are black and curved but must be trimmed and the holes cut/p inched/drilled for the plastic guides that lock them in. They are working fine.

67 satellite vent window questions.

1967 satellite

Well-Known Member

66383

DETAILS MATTER!

joerachet

Well-Known Member

69L48Z27

Well-Known Member

joerachet

Well-Known Member

1967 satellite

Well-Known Member

1967 satellite

Well-Known Member

69bfan

FBBO Vendor

VFilms

Well-Known Member

AR67GTX

FBBO Gold Member

Similar threads