• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Machined a little Mopar today

Bigred68

Bigred68

Active Member
Local time
6:41 AM
Joined
Jan 27, 2011
Messages
35
Reaction score
97
Location
Albuquerque
Not for my 68 but thought I would share what I did today. I've seen a few modern Mopar's with these LED badges, but they're so thick and bulky. I challenged myself to see if I could make one, maybe a little better, but a lot thinner. this is what I did.

Machined black Delrin with acrylic insert and aluminum back. It finished at .450 thick
but can still be thinner.

45999136295_b66e354a64.jpg


45999134685_1565248aed.jpg


45999131965_3f411d1673.jpg


45999129035_f677d6276a.jpg


45999126845_cedf55ed84.jpg


45999125105_65f5cb1589.jpg


46861174782_473ed6380d.jpg


39948532813_f3d145abb6.jpg


 
Pretty cool. I don't think I've seen them on modern cars. Old Pontiacs, yes.
 
pretty cool
 
You must log in or register to reply here.

Similar threads

Bob Lynch
A little Mopar Action over the weekend
Replies
6
Views
557
chargervert
chargervert
Snowbug778
roadrunner horn restro mod
Replies
5
Views
606
dadsbee
dadsbee
SteveSS
It's good to have a veterinarian nurse in the family.
Replies
4
Views
410
Dakar Timm
Dakar Timm
S
Hello from Nebraska
Replies
14
Views
520
HD539
HD539
moparedtn
Well, that's the last time I do THAT...
Replies
16
Views
1K
moparedtn
moparedtn
Auto Transport Service
Back
Top