• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

B O R E D>> What plans do you have for car in the spring

44070dart

Well-Known Member
Local time
10:29 PM
Joined
Jul 7, 2009
Messages
1,926
Reaction score
2,165
Location
right behind you
Sitting here, bored, and it's -4 degrees and a blizzard hit the area, so I'm not going anywhere. Just thinking of spring and what I have planned for the Dart I bought last fall.
I've bought a hemi scoop, front spoiler, buckets and console. Picked up a rear tail stripe and hood 408 stroker decal from a guy on FABO. Tail stripe is different from stock type and should look great, something like the picture. Hood decal is the diagonal one that sits on the front corner.
Picked up buckets for it for, drum roll please, $80 ..YEP 80 bucks for TWO beautiful bucket seats. I know it's very hard to believe but the guy threw them on CL to get them out of the way and I was the first to respond after they were on for 15 minutes, and snagged them. Right place right time. Also, what a jerk I am, when I went to pick them up his ad was for $100, I said "would you take $80". Man, sometimes I scare myself. He was building a race car and didn't need them. Will try to dye them black, if that doesn't work I'll get new covers. But they were a STEAL.
Also picked up a console from an e-body that I like better than the a-body console. I think I can make it fit the 4-speed shifter. Console door is missing so thinking of putting cup holders or a speaker in there.
Bought new 15x8 steelies for it and will be ordering new rubber, 255's for the rear, 205's for the front. Selling the slots so that's a push. Need to finish the exhaust from mufflers back. I have 3" over the rear end and tail pipes the previous owner gave me, but have the feeling they may not fit or he would have probably completed the exhaust. We'll see. Bought a cap for the dash pad, and with buckets, and console the interior is complete. Put gauges and tach in last year and cleaned up dash it and looks good.
You can tell I'm bored and rambling but I have a lot planned. Engine, trans. and rear on my little *** kicker were done when I bought it, cars a rocket.
So I'm looking forward to the vernal equinox :) .. What are you planning?

01717_fHB9RkqhB9M_600x450.jpg Mopar_Charger_stripes.jpg s-l1600 (8).jpg dart 408 .jpg
 
Right there with ya... way to cold to be outside, I can't keep my hands off the car. Got up at 4am the other day to attack the engine wiring harness, re-solder connectors and restore grounds, clean up bulkhead connectors, add a 10gauge bypass from alternator to start relay.

Last weekend converted 2.94 open to 3.23 suregrip and added front sway bar.

My plans for spring are power disc conversion, cam+intake manifold swap. Insulate (dynamat? boom mat?) interior and wire up retrosound stereo. Wax it a couple times.
 
Plans for Spring? Well, I'm still out braving the cold in my garage (not today, I'm crazy, not stupid). I'm trying to get my car ready for cross-country trips with the family. My next step is to replace my 3.91 posi with 2.76 posi since I don't have overdrive. Also plan to work on my new motor (more streetable) when it gets warm.
 
I'm gonna strip down to shorts and a t-shirt and wash my car and mow my lawn in about an hour.
(Lol, sorry, I don't mean to be a jerk, but there has to be some advantages to living in this God forsaken place.
 
Hopefully Spring comes sooner than later but my plans are to button up a few items on my super bee. When I purchased the car it had a B&M floor shifter which I didn't care for, so I moved it back on the column so I need to replace the front carpet. I need to adjust the truck lid and the right tail light. I have to figure out why the fuel gauge isn't working and hopefully put some diamondback red lines on the car. Just a few tweaks but it keeps me busy in the garage.

20190130_111643.jpg 20190130_111622.jpg
 
Chunky 611, is that bee turquoise with a red tail stripe? Awesome color combo, fat diamondback redstripes would be perfect!
 
Thanks 33 Imp! Yep its turquoise with red stripe. I think the redline will really complement the stripe.
 
For me...drive the crap out of it I hope!
 
Here you go 44070dart. Hope this works. The camera on my phone isn't the greatest. Yes, Xp29h, my wife and I want to drive it a lot. We took it to the Route66 reunion in Springfield Illinois last year, which was 300 mile round trip.

20190130_141353.jpg
 
Here you go 44070dart. Hope this works. The camera on my phone isn't the greatest. Yes, Xp29h, my wife and I want to drive it a lot. We took it to the Route66 reunion in Springfield Illinois last year, which was 300 mile round trip.

View attachment 712985
Love that color
 
"BORED"... **** what are your handy man skills like??? Come on up and take over the house renos so I can get back to my friggin car.. PLEASE>>>>> !!!!
 
Hey, I'm five miles from the bridge, but Ontario's a big place.
Built a 650 sq.ft. room alone in my basement over 3 winters, just worked on it when the weather was real bad. That was a few years ago. There's just me and the wife in a 2400 sq. ft. home, so we needed the room like a hole in the head. Wife say no more rooms or remodeling, she doesn't want the house in disarray for two months. Don't think I can do it anymore, the knees are in ruff shape. The winter up until now has been decent for our area, it has been MUCH worse in the past. Little cabin fever right now.
 
50 degrees out I call this perfect weather! You guys bring your cars and set up camp across the street we can have a big moparty !!!!
 
I cannot wait for the warm weather
I have so much car stuff to do its stacked up like cordwood..
 
Some contemplations...got most of the car sorted out before winter.
Debating whether to drop down from 391's to 355 or even 323's. 451 stroker 500hp 4spd
Debating to swap the 15" rallyes for either body colored steelies or 17" year one rallyes
Need a new driveshaft made
Change the shifter mechanism
All of which can wait til spring
 
Jamiemagazinepic.jpg
I'm not waiting that long! Haha. Been out in my kinda heated garage finishing up my frame connector installation. Then i Need to re drill axles to 5 on 4.5, and get some 15" wheels. Yea, I have a 70 Dart now. And for spring, I want to pull out this ho hum RV 440 and build a 451 for it. Here's a few pics.
20190112_121908.jpg
20190122_080957.jpg
The middle pic is what it looks like now, top pic is sorta how it will look.
 
Last edited:
Auto Transport Service
Back
Top