SimDog
Well-Known Member
Hey all,
I need to get an estimated value of a D 440 HP block date coded 1-17-68. It is complete except for the carburetor. One of the motor mount tangs on the passengers side is damaged, but was told this is the Non-Torque side and it could be re-welded and be fine. The machine work has been completed but needs assembly. I am looking to purchase it and was just wanting to make sure I get a good deal on it. I will absolutely have to have it inspected and magnafluxed before I purchase it.
Thanks in advance.
**Adding a picture of the block to show the broken tang.
I need to get an estimated value of a D 440 HP block date coded 1-17-68. It is complete except for the carburetor. One of the motor mount tangs on the passengers side is damaged, but was told this is the Non-Torque side and it could be re-welded and be fine. The machine work has been completed but needs assembly. I am looking to purchase it and was just wanting to make sure I get a good deal on it. I will absolutely have to have it inspected and magnafluxed before I purchase it.
Thanks in advance.
**Adding a picture of the block to show the broken tang.