74charger07ram
Well-Known Member
Someone on ebay has a front sway bar for a 73-74 B-body, part #3722411. Looking in my parts book it fits a big block car. Does anyone know what the diameter would be? Can't get hold of the ebay seller. Thanks
Does anyone know what diameter this is
- Thread starter 74charger07ram
- Start date
- Local time
- 11:57 PM
- Joined
- Apr 13, 2012
- Messages
- 35,493
- Reaction score
- 124,997
- Location
- Granite Bay CA
Rarely was a stock anti-sway bar larger than 1 inch. Unless you are interested in a factory restoration, I'd go with a larger aftermarket bar.
- Local time
- 12:57 AM
- Joined
- Feb 22, 2013
- Messages
- 3,854
- Reaction score
- 4,754
- Location
- The Red Anvil Dog House
Hellwig.
odcics2
Well-Known Member
Stock bar in front was 5/8 on my 74 Charger SE. No rear bar.
(Rallye cars got a bar in back.)
I had great results with ADDCO bars: 1" front, 3/4" rear.
Rate = 260 lbs/inch front, 220 lbs/inch rear.
The car was neutral! Could hang the back out a bit using the pedal around sweeping corners, like when getting on the freeway. It cornered extremely flat, too.
I used to run circles around my buddy's '78 Trans Am, much to his surprise!!
(Rallye cars got a bar in back.)
I had great results with ADDCO bars: 1" front, 3/4" rear.
Rate = 260 lbs/inch front, 220 lbs/inch rear.
The car was neutral! Could hang the back out a bit using the pedal around sweeping corners, like when getting on the freeway. It cornered extremely flat, too.
I used to run circles around my buddy's '78 Trans Am, much to his surprise!!
Similar threads
