On the Coronet I have a .94 Saginaw pump with the oval fill tube. There's a leak at the pressure hose fitting.
Before opening up the pump, can the pressure hose fitting be removed and the O ring replaced without tearing into the pump? For those of you that have the '69 FSM, I'm looking at page 19-29, Fig. 20.
If not, I've been researching seal kits and think I have it narrowed down to either Gates #351170 or Edelman #7895. Can't be sure because the reference is by engine type not the make (Saginaw, Federal, TRW)
The other part numbers that seem to cross-reference are Gates 351090 and Edelman 7918.
Has anyone that has rebuilt this pump kept the rebuild kit #?
Before opening up the pump, can the pressure hose fitting be removed and the O ring replaced without tearing into the pump? For those of you that have the '69 FSM, I'm looking at page 19-29, Fig. 20.
If not, I've been researching seal kits and think I have it narrowed down to either Gates #351170 or Edelman #7895. Can't be sure because the reference is by engine type not the make (Saginaw, Federal, TRW)
The other part numbers that seem to cross-reference are Gates 351090 and Edelman 7918.
Has anyone that has rebuilt this pump kept the rebuild kit #?