WTB 18 spline A833

• Feb 24, 2019

• #1

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

Looking for 18 spline A833 with bellhousing, shifter, pedals etc, Everything and complete would be easy but just the trans is a good start! For rebuild is very OK, Help with sending parts to shipping company is needed. Is going with a 413 in a -63 post Belvedere.

 

• Feb 24, 2019

• #2

zyzzyx

FBBO Gold Member

FBBO Gold Member

Local time

3:10 PM

Joined

Aug 5, 2011

Messages

3,668

Reaction score

5,190

Location

Lisle, Illinois

Feedback: 0 / 0 / 0

Have a 18spline out of a 67 GTX. Needs to be gone through, it's original with about 40k on it.
Also have a set of pedals, but their for a 68RR? I don't know if it's the same.

 

• Feb 26, 2019

• #3

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

Sounds interesting! Bellhousing for BB also? I will try find any to read regarding this. I guess with the gear box its only the slip yoke that is different from my ball n trunnion. Thanks

 

• Feb 26, 2019

• #4

zyzzyx

FBBO Gold Member

FBBO Gold Member

Local time

3:10 PM

Joined

Aug 5, 2011

Messages

3,668

Reaction score

5,190

Location

Lisle, Illinois

Feedback: 0 / 0 / 0

No, sorry. No bellhousing.

 

• Feb 26, 2019

• #5

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

Ok, How much do you want for it? Would it be possible to arange with sending it to an FL address? Thanks.

 

• Feb 26, 2019

• #6

zyzzyx

FBBO Gold Member

FBBO Gold Member

Local time

3:10 PM

Joined

Aug 5, 2011

Messages

3,668

Reaction score

5,190

Location

Lisle, Illinois

Feedback: 0 / 0 / 0

I'll send it to the North Pole if you like! Crating it and shipping it will be extra. Let me know
what you come up with. Some of the guys on this forum have said they use Fastenall.
I could check with them. Where exactly in Fla?

 

• Feb 27, 2019

• #7

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

I Think it will be an Orlando address. I really don’t know what you sell them for over there, and here there are not many for sale. 40k doesnt sound that much but I guess mostly depends on which kind of driving, but your saying working but should be checked?

 

• Feb 28, 2019

• #8

VANDAN

FBBO Gold Member

FBBO Gold Member

Local time

4:10 PM

Joined

May 27, 2011

Messages

6,238

Reaction score

11,881

Location

Western NY

Feedback: 8 / 0 / 0

Saw your post for the 833. Not sure, but the early B body's may have used a different case and tailshaft than the later models, 66 & up ? I am looking for one also for my 65, and I know that one is different from the later ones...

 

• Feb 28, 2019

• #9

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

From what I can figure out the difference is the slip yoke for the later and the ball n trunnion for the earlier? I’ve had wrong many times before. Thank you.

 

• Feb 28, 2019

• #10

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

The bellhousing differs I was told, in this there was no bellhousing included. For the pedals i guess it differs, just seen photos though.

 

• Mar 12, 2019

• #11

Dogbergs

Active Member

Local time

10:10 PM

Joined

Dec 5, 2014

Messages

26

Reaction score

17

Location

Solleftea

Feedback: 0 / 0 / 0

Still looking!