• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hemi Rocker arms help

I see you guys do not use the springs. I see red clams? Does it keep the rocker more stable? Are they a must?
 
I will have a couple of new purple sets at Indy they have a few scratches on them $350 set
 
I think they are up to like $3250.00 now. I am W.D. with T&D and tried to go direct for a larger ratio. Nope, proprietary to RBRE''s only.
 
Last edited:
I see you guys do not use the springs. I see red clams? Does it keep the rocker more stable? Are they a must?
The clamps just keep them tighter so they can't move around as much.On the wedge engines they have different size shims to keep them from moving around and mine still have shims to help locate the rocker as well.
We also had ti weld a retainer to the old spring compressor to keep it from distorting when installing the springs:lol:

8.15.17 076.jpg 8.15.17 077.jpg 8.15.17 079.jpg 8.15.17 085.jpg 8.15.17 086.jpg 8.15.17 087.jpg
 
We make the purple ones in house. I usually only sell to holesellers. The sets I’m bringing have a marks on them. Functionality they are good the blue ones have the greedy mopar markup. I don’t know who makes the blue ones
 
Who make the red rocker stops? (clamps? holders?) Not sure what they are called.
 
I haven’t seen a purple set that we haven’t made. With ours you can bolt them on the heads with shafts on them and slide the shafts out without unbolting the stands. They are made on a 4th axis CNC Mill
 
Auto Transport Service
Back
Top