• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Air Grabber

Jaymarr65

Well-Known Member
Local time
7:51 PM
Joined
Oct 23, 2015
Messages
64
Reaction score
35
Location
Nj
View attachment 743662 View attachment 743663 Well it's coming together finally. I just have to bolt the air box to the bubble , Ag door, decal on the door, actuator and hook up the green wire and I'm done.

View attachment 743662 View attachment 743663 View attachment 743664 View attachment 743666

IMG_4068.JPG IMG_1876.JPG View attachment 743670 IMG_1878.JPG
 
Nice work
You did it the hard way
I cheated and got lucky finding a real one off this board
 
One problem, everything is correct according to mopar diagrams but when it move the switch to close it opens and open is closed. Check my connection over and over again with no luck.
 
Perhaps if you switch the vacuum lines on the door actuator or the vacuum switch. One of the lines is reversed. Good luck
 
Auto Transport Service
Back
Top