SOLD 3.73 Sure-grip Center Section

• Apr 25, 2019

• #1

Hemihead2

Well-Known Member

Local time

8:19 PM

Joined

Sep 11, 2017

Messages

103

Reaction score

26

Location

Pa

Feedback: 1 / 0 / 0

Contact seller

Just set up. 489 case, Cone SG unit with a small yoke. Lightly used gear set with all new bearings, crush sleeve, etc. 3.73 ratio. Ready to drop in. Asking $800.

We can talk about shipping options from 16602 or possible drop off to local shows.

 

• Apr 27, 2019

• #2

rs1

Well-Known Member

Local time

7:19 PM

Joined

Nov 7, 2011

Messages

517

Reaction score

36

Location

nj

Feedback: 7 / 0 / 1

Can a large yoke be installed on it?

 

• Apr 27, 2019

• #3

Hemihead2

Well-Known Member

Local time

8:19 PM

Joined

Sep 11, 2017

Messages

103

Reaction score

26

Location

Pa

Feedback: 1 / 0 / 0

It has a brand new crush sleeve in it and the pinion bearing preload was properly set. Yes, you could switch yokes to the bigger one BUT the better choice would be to buy the combo U-joint that will accommodate the smaller size yoke diameter.

 

• May 2, 2019

• #4

Hemihead2

Well-Known Member

Local time

8:19 PM

Joined

Sep 11, 2017

Messages

103

Reaction score

26

Location

Pa

Feedback: 1 / 0 / 0

Correct, it’s still available.