dukeboy_318
Well-Known Member
i have a 64 440 with a 318 poly. Original manual steer car that was converted by PO at some point to power steering using a stand factory Mopar box.
I’m looking at headers for the poly but none clear the power steering box. Heck, there is barely 1/8 of an inch now between the factory manifold and the power steering box. Is there a possibility the motor is bolted too far over on the drivers side or is that clearance normal?
I’m looking at headers for the poly but none clear the power steering box. Heck, there is barely 1/8 of an inch now between the factory manifold and the power steering box. Is there a possibility the motor is bolted too far over on the drivers side or is that clearance normal?