• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Proper “non exterior” color

Go Fly

Well-Known Member
Local time
6:51 AM
Joined
Apr 19, 2016
Messages
110
Reaction score
27
Getting close to starting putting color to my 68 Bee. Going to paint the engine compartment however thoughts on wheel wells, trunk, underneath floor pan, exc. I am doing a pretty nice restoration and want to do the right thing paint wise without going overboard.

Advice welcome.

Thank you
 
Whatever the body color is. It’s the same for wheel wells, trunk and engine bay.
 
underneath floor pan was dip primed colored with body colored over spray
body color for wheel wells, trunk and engine bay.
Resto Rick carries a urethane paint that is the same color as the dip primer..
many people will paint the underside but that is not correct.
 
Last edited:
Thanks flypaper,

Do you have resto ricks contact info?
 
Its always a where do you stop thing.... somewhere between nice driver and trailer queen
 
I always finish painting my cars....unlike the factory.
 
Auto Transport Service
Back
Top