jdakrt
Well-Known Member
looking for a 66 hood emblem/ornament from a belvy 2 or satellite. thanks.
WTB 66 Belvedere hood emblem / ornament
- Thread starter jdakrt
- Start date
- Status
What engine callout none, 318,383 or 426.
jdakrt
Well-Known Member
383 if possible.They make stickers so the callout isnt a deal breaker
R413
Well-Known Member
Here is some hood ornament info. 1966 used a sticker for the engine size. It will only go on the back side of the ornament, and covers the entire space. 1966 ornaments have a flat top.
1967 the engine size was cast into the ornament front and back and dnid’t use a sticker on them. A 273 just has V8 instead of the threee numbers. A 6 cylinder had the area blank. 1967 ornaments have a peak on the top. See pictures below.
The chrome base and underside retaining nut are different between Belvedere and Fury. The body line on the hoods are different. Fury hood is a flatter than angle what is pictured here.
1967 the engine size was cast into the ornament front and back and dnid’t use a sticker on them. A 273 just has V8 instead of the threee numbers. A 6 cylinder had the area blank. 1967 ornaments have a peak on the top. See pictures below.
The chrome base and underside retaining nut are different between Belvedere and Fury. The body line on the hoods are different. Fury hood is a flatter than angle what is pictured here.
Last edited:
jdakrt
Well-Known Member
I don't know the "who", only that they are listed on ebay all the time. And I haven't seen the quality(IF there is any).
The ones on ebay are ok. Numbers a little off and not raised, a comparison. Top NOS.
chickendeluxe
Well-Known Member
Last edited:
- Status
Similar threads
