1968340S
Well-Known Member
Proper way to install drip rail molding on my 1966 Satellite. I have looked on YouTube and most are full sized molding installations, not the separate three piece molding on B bodies.
The car has been repainted and the area for the molding was not masked off. So paint build up will be a problem first off. I understand the molding should be installed with the top first on the rail and then pulled down and hopefully snap into place. How do the pieces fit in place.
The front and rear moldings first and then the top molding over the rear connection and then the corner for the front? I'm using a nice pair of OEM molding.
The car has been repainted and the area for the molding was not masked off. So paint build up will be a problem first off. I understand the molding should be installed with the top first on the rail and then pulled down and hopefully snap into place. How do the pieces fit in place.
The front and rear moldings first and then the top molding over the rear connection and then the corner for the front? I'm using a nice pair of OEM molding.