Shipping

TrackPack · May 31, 2019

What is the best way to package iron cylinder heads for shipping? I'm sure that I can count on some rough handling. Any experience greatly appreciated.

NOSTRT980 · May 31, 2019

line the box with thin plywood. worked for me

MOPOWER871 · May 31, 2019

I've bolted a head down on a piece of 1/2" plywood ,they sell double walled cardboard, or find a box that this will fit into with about 4" clearance top, bottom, sides, then bubble wrap the **** outa everything. good layer on bottom ,then place another piece of 1/2" plywood on top when ready go, close box. 3" wide clear plastic masking tape completely wrap every inch of the box this will help insure if the box gets wet the cardboard won't weaken. good luck

TrackPack · Jun 1, 2019

Thanks for the replies.

dan juhasz · Jun 1, 2019

ive just wrapped them in cardboard so there is no movement or space, three four times around

Crackedback · Jun 1, 2019

Wrap in cardboard and stuff one in a USPS gameboard box. About $20/each to ship via flat rate.

I ship iron intakes in game board flat rate boxes. Boxes are free too! Order a set of 10, delivered to your home and use the extras to wrap heads!

Shipping

TrackPack

Well-Known Member

NOSTRT980

Well-Known Member

MOPOWER871

Well-Known Member

TrackPack

Well-Known Member

dan juhasz

FBBO Gold Member

Crackedback

Well-Known Member

Similar threads