Gabe
New Member
I have a 1974 road runner and there is a spot of rust on the driver side door in the bottom corner. I was wondering what the best way to take care of it is. There are also two tiny holes where the spot is.
Rust
- Thread starter Gabe
- Start date
- Local time
- 11:01 PM
- Joined
- Dec 25, 2011
- Messages
- 5,259
- Reaction score
- 6,351
- Location
- White Cloud, MI
Cut the rusty area out and weld in a fabricated patch and metal finish the weld. Then proceed with conventional body work and paint.
Mike
Mike
Scrap the car.
- Local time
- 11:01 PM
- Joined
- Jul 17, 2008
- Messages
- 19,176
- Reaction score
- 53,028
- Location
- South Jersey USA
you can glue a patch in it with panel bond if you want to avoid welding
- Local time
- 8:01 PM
- Joined
- Apr 13, 2012
- Messages
- 35,544
- Reaction score
- 125,207
- Location
- Granite Bay CA
That is funny. I am a smart *** too and often respond in a similar manner.
The OP has ONE post here and possibly has little experience with cars. While being obnoxious is entertaining, 493 Mike has a helpful suggestion the OP might like.
I liked YOUR response though. I saw the humor in it.
Geri
Deceased, But not forgotton
a product called rust Mort- will stop further rust , there are two versions of rust mort- the one for the inside/unseen leaves a black paintable coating, then -proceed as you see fit depending on size of damage. rust issues are the most miserable things to find on a car. well, that and 6 more payments you hadn't figured on.
Similar threads
