• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Parting a rough 1971 Satellite

Status
Not open for further replies.
I'm sure

I'll see if I can get one out
 
@6872n73

Driver's rear glass is out.

Looks pretty nice.

Do you need only the glass?
IMG_20190620_194352.jpg


$35 plus actual shipping


OK- "problem uploading photos"

wonder what that's about.....
 
Last edited:
If anybody local needs-

A 71/72 only decklid with go-wing mount cut outs
One small soft spot on the underside
lip area is still there and solid but is separating from interior frame
I'd sandblast in between, spray rust converter in between, and hammer or vice grip it back closed

$175

A decent passenger fender
50 cent piece sized rust hole in dogleg area
otherwise looks clean and straight
Comes with painted fender mounted signal indicator, crazed marker lens, and nice marker bezel

$250

Complete 1971 Rallye dash with 150 MPH speedo and all knobs, full rally dash harness, uncut bezel, AM radio, 1971 only AC control panel, AC vents, glove bx liner and light, ash tray, pass side AC vent panel, and cracked dash pad.

$325
 
@Grabbergreendream

grill brackets

tried to sand blast the most solid one but my cabinet is struggling with the 90+% humidity

$25 if you want them

IMG_20190622_152459.jpg
IMG_20190622_152509.jpg
 
Last edited:
marker bezel


IMG_20190622_152543.jpg
 
@kma9176

here's the driver's regulator

That was fun to get out

Looks like you are cross the pond.

I'm looking for a box it will fit in

shipping might be a bit on the expensive side.

View attachment 786129 View attachment 786130

That reg looks great - will do the job
It only needs to be sent to Florida to the container ?? Just let me know how much you want including the shipping and how you want paying??
I know someone else was after the hood release bracket and release rod - but if they don't need know I will have them as well.
would you have a wiper switch knob for a rally dash & heater control chrome knobs ??

Regards
Kev
 
Hey YY1,

what kind of shape are the slapper bars in ?
 
IMG_20190623_163544.jpg
 
IMG_20190623_142513.jpg
 
I saw a member has both grill headlight sections and the lower section for sale.

I have the center section.

Needs sanded and painted but all the mounting towers look solid.

$35 plus actual shipping.

IMG_20190623_162638.jpg
IMG_20190623_162648.jpg
IMG_20190623_162701.jpg
 
...and I have the pass side headlight section.

$25

IMG_20190623_162737.jpg
IMG_20190623_162746.jpg
 
...and the shields

$25 for both.

IMG_20190623_162836.jpg
IMG_20190623_162853.jpg
 
IMG_20190626_141354.jpg
IMG_20190626_141403.jpg
 
Pm me your inbox is full. thanks!
 
@YY1 Can you PM me interested in a part... Thanks..
 
outside mirror is available ? send me PM
 
whatcha need?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top