Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Either one should work, the bottom one includes the connector for the BU lights, top one is just bare terminals. The third wire is for the REVERSE light on the dash.
Yes you have dadsbee and thank you. I would think the harness would be 2 plugs 1 for switch on gearbox and 1 female for the bulkhead plug what would be the wire on the Yearone harness for slot z for reverse??And were to order male plug for bulkhead slot c&d?
Dadsbee I am having the same issue mine goes from the transmission straight to the bulkhead Got any suggestions for a fix. What is the black and white wire out of the bulkhead used for?
Thanks in Advance
Bryce
Is there a dash light on a '68?.. and yes from what we've discussed around here something else takes residence in that spot on a '68's firewall harness.
Yes there is a light on the lower dash. Any suggestions. The old reverse light had a purple wire so I plugged the new one into the purple wire from the harness.
Someone sorted this out on a '68.. but I can't remember who it was, but I remember it got feed from the kick panel harness instead I believe .. Help guys .. @The Rebel@showard