• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 Plymouth spring and mini tub mod

What model is that? There's also a big difference between Dodge and Plymouth.
 
10.5w, damn
This picture is that same W tire on 15/12 rims with 6.5 bs section width is around 14 across

IMG952018051795155513800.jpg IMG952018051795160959955.jpg
 
Hope this picture gives you a idea

View attachment 792055
Something on the back side of the hinge is hitting the tub about halfway down when trying to close it. Are those supplied brackets just fillers to connect the hinge back to the tub? I'm an idiot, I welded those in to support the front side of the wheel well.it fit perfectly. Lol
 
[QUOTE="Are those supplied brackets just fillers to connect the hinge back to the tubQUOTE]

Yes that's what they are for...... I think there was something in the directions that said you can get in the trunk with a helper and close it then mark the spot it's hitting then wack with bullpen hammer
 
[QUOTE="Are those supplied brackets just fillers to connect the hinge back to the tubQUOTE]

Yes that's what they are for...... I think there was something in the directions that said you can get in the trunk with a helper and close it then mark the spot it's hitting then wack with bullpen hammer
Thanks!
 
Got a little burnt out on body work so started putting the rotating assy together. Installed the bulkhead, filled the pan with water to check for leaks.
20190702_090328.jpg
20190702_090128.jpg
20190702_090159.jpg
 
Auto Transport Service
Back
Top