Modern Bullitt build

showard · Jan 24, 2019

Great repair ideas!

keepat · Feb 3, 2019

The grill repairs are done and it’s all sanded to 600 grit, time for paint!
Thanks
Pat

screen capture software

showard · Feb 6, 2019

It looks straight with no warps. :thumbsup:

keepat · Feb 6, 2019

showard said:
It looks straight with no warps.

Yes, this grill in great shape! My 1st 68 Charger (12+ years ago) was warped along the upper center grill. I made a form clamp it back in shape, It worked well.
Thanks
Pat

showard · Feb 7, 2019

keepat said:
Yes, this grill in great shape! My 1st 68 Charger (12+ years ago) was warped along the upper center grill. I made a form clamp it back in shape, It worked well.
Thanks
Pat

Did you heat it in the clamps to help it reset back in shape?

keepat · Feb 7, 2019

showard said:
Did you heat it in the clamps to help it reset back in shape?

After clamping it with a form I made to hold its shape and hung it upside down and left it in the sun for a few weeks.

keepat · Feb 9, 2019

I finally received the backordered AAR radio so I could complete the dash. Radio is Bluetooth audio as well as hands-free phone, not sure how well it works but it looks and fits great!
Thanks
Pat

fisto fallout 3

Richard Cranium · Feb 13, 2019

Half the radio's missing!

You'll have to give us a report on it once you get it running.

gkent · Apr 15, 2019

Where are you running the front end wiring through the firewall ? And into the engine compartment ?

747mopar · Apr 16, 2019

Nice, love the bluetooth radio.

funknut · Jun 6, 2019

Hi Pat - I'd be grateful of a pic of the back of the dash if you have one to see how you routed wiring.

Thanks!

keepat · Jun 30, 2019

I’m installing the vinyl top over the 4th of July holiday. So I started by putting all of the vinyl top trim so I know where to locate the final cut. For the last 3 years this top has been laying over my Trans Am or viper. It’s nice to have it laying on the charger now ;-)
Thanks
Pat

how many years to become a forensic anthropologist

keepat · Jun 30, 2019

funknut said:
Hi Pat - I'd be grateful of a pic of the back of the dash if you have one to see how you routed wiring.

Thanks!

Sorry for the delay I’ll see if I can get you a decent picture
Thanks

keepat · Jun 30, 2019

keepat said:
Sorry for the delay I’ll see if I can get you a decent picture
Thanks

Don selleck · Jun 30, 2019

nice!!!

funknut · Jun 30, 2019

That helps a ton, thanks!

Sixtynine_Bird · Jul 1, 2019

Thanks for the update, can't wait to see it finally installed.

Great job

keepat · Jul 9, 2019

With the vinyl seams even and clamped at the front I glue the center 6” back to front. Then folding over the drivers side I glue over to the seam and then the same on the right side. After spraying the glue on both the roof and vinyl I put some plastic down to let me flip the vinyl over without sticking. Then holding and pulling the vinyl up I remove the plastic and stick the the vinyl down. Now with it glue seam to seam next will be down the pillars.
Thanks
Pat

fallout 3 all vaults

whayden2003 · Jul 9, 2019

I knew my nose was itchy for something. A Keepat it update on a Tuesday morning. Hooray.
Love the technical details. Thanks.

747mopar · Jul 9, 2019

Looking good but I'm Chomping at the bone to see this thing sitting at ride height and wheels installed.

Modern Bullitt build

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

FBBO Gold Member

FBBO Gold Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

FBBO Gold Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads