• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1963 426 Max Wedge Engine and Transmission

Status
Not open for further replies.

bb70duster

Active Member
Local time
7:40 AM
Joined
Jul 24, 2019
Messages
28
Reaction score
55
Location
Hemet, California
Feedback: 0 / 0 / 0
Contact seller
REAL 1963 426 Max Wedge Engine, 11.5-1 Engine, complete minus intake/carbs, and exhaust manifolds... It has the heads, rockers, oil pan, swinging pick-up, pulleys, balancer, water pump housing, even the original water pump with phenolic impeller, All original internals (aside from Cam is Isky) push rods, lifters, all bolts, starter, original Distributor is there, and have the original 727 with converter and flex plate (all MW specific) from behind it... even the trans cooler lines... Block is standard, has original pistons, rod, crank, even the bearings out of it... Block does have 2 rusty cylinders, but again, its still standard. I also have a set of factory high compression pistons in good shape Ill include, as well as a new set of aftermarket pistons (believe they are Jahns) Asking $8K If anyone is serious, contact me and I can get more detailed pics of everything... Pic of the 63 Plymouth is the car it came in... Mike PHONE NUMBER REMOVED BY STAFF

IMG_1142.jpg IMG_1144.jpg IMG_1145.jpg IMG_1137.JPG
 
Last edited by a moderator:
Was not aware that any maxwedge blocks where painted that color,somebody school me!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top