• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

the 72 rallye charger is mine now

KIMG1374.JPG


Well the charger is back in the garage ready for some work! No BS I'm getting something done on this car . Migs car is getting close I need to catch up !
 
Cut the rusted parking brake area out made a plate welded it back in !
Set up the rotisserie found out it was not all ready set up for a b body!
Had to modify a bit and added some brackets ! I need to figure out how to mount the rear bars
KIMG1380.JPG
KIMG1381.JPG
KIMG1382.JPG
 
Any one got a picture of how to hang this beast off the rear? Do I use the bumper holes? Seems kinda weak ? But what's a empty shell 1000# ?
 
So I found this on Google.
Screenshot_20190722-004637.png

Not sure if I'm 100% sold that's alot of #'s hanging off that panal ! I see it's reinforced on the back what do you guys think ?
 
Not sure what ur asking.

But if your talking about the plate: if its gusseted and 1/4 plate, that should work. 3/8 plate would no doubt be stronger. I'd go to the wall thickness of the tubing and just match the thickness there.
 
fatecaptured said:
Not sure what ur asking.

But if your talking about the plate: if its gusseted and 1/4 plate, that should work. 3/8 plate would no doubt be stronger. I'd go to the wall thickness of the tubing and just match the thickness there.
Click to expand...

Sorry meant the panal on the car itself where they have this rotisserie bolted to!
 
So made a bit of room in my garage today ! Made the brackets up for the rear section for the rotisserie! (Ran out of gas) so tomorrow I'm getting my tank filled and finishing my gussets! Then I'm pulling the rear and k frame out and sending the charger in the air!
KIMG1405.JPG
KIMG1406.JPG
 
KIMG1429.JPG
KIMG1430.JPG

So the charger is officially in the air all 4 corners!
Pulled the leafs and rear out started getting k frame out but my garage time got cut short yet again .
I was çoncerned about how it would spin figured it would be hard ! Well fairly easy I must say ! The fun will get to start soon
 
Well for those that have been waiting the dustless blaster was finally hired and he showed up today!!!!
KIMG1716.JPG
KIMG1717.JPG
KIMG1718.JPG
KIMG1719.JPG
KIMG1714.JPG
KIMG1720.JPG
 
So we ran out of time today,he has to. Come back tomorrow night or Saturday to finish up the doors ,hood and fenders !
I'm a little scared of what the doors might be hiding. We will find out soon !
 
Trust me - been there, done that.
Years from now you'll still find sand coming out of the nooks and crannies.......
But it's well worth it - it looks great!
 
So much sand!
My driveway looks like a beach I got alot out of car going to roll it back out today or tomorrow blow it out really good and prime it
 
Ok guys I regretfully post this up ! I've tried selling her a few times and tried selling just the shell with out the parts !
No takers do sadly I finally called it after spending a very long time looking the car over and with my current situation I let her go to the great scrap can beyond!
I kept everything that was good witch was basically everything but the shell !
So I will be selling everything off at this time if you need something please ask I would like to get what I spent on the parts back but will take a slight loss if needed!
I have tons of brand new parts sitting here ready to go to there forever homes!
I can no longer do this stuff since my 2 back surgery s it's just very pain full doing the least bit of anything so I'm calling it maybe one day I can play with the big boys once again! But until then I will be without a b body !
I still however have my 64 chry 300 convertible witch will stay with me till the bitter end !
Please if you need parts help me out before buying from the catalog it's literally the same stuff just been sitting on my shelf instead of classic industry s shelf
 
You must log in or register to reply here.

Similar threads

bad69bee
  • Locked
FOR SALE 1973 Dodge Charger Rallye
Replies
4
Views
3K
bad69bee
bad69bee
Elimin8317
"Gentle Ben" is Back! The rare 1966 Coronet 426 Street Wedge 4-Speed has a new owner
2 3
Replies
47
Views
4K
YY1
YY1
H
interior plastic panels
Replies
7
Views
672
Hanny
H
D
  • Locked
FOR SALE 1972 Charger Rallye
Replies
8
Views
3K
thcmaly
T
bad69bee
  • Locked
FOR SALE 1973 DODGE CHARGER RALLYE $36K OBO Aynor, SC
Replies
0
Views
2K
bad69bee
bad69bee
Auto Transport Service
Back
Top