• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

63 fury 440 motor mounts

63fury500

FBBO Gold Member
FBBO Gold Member
Local time
8:13 AM
Joined
Jun 19, 2016
Messages
311
Reaction score
86
Location
Beaver Dam, Wisconsin 53916
Looking for a source to buy a complete set of motor mounts to put a 440 into a 63 fury,the fury had a 361 so its got the big block kmember,any pics and info on where to get mounts ,thanx in advance
 
Well Schumacher is out of stock and I doubt they will be anytime soon.You might try Mancini or Bob Mazzolini as they might have some in stock. Trans Dapt don't make them for B bodies.You may want to look for used Big Block engine brackets(you don't have the ones from the 361 ?) the insulators are readily available most places.
 
So I looked up Bob Mazzolini and their store says the have 'um #SKU 81476. I would call to be sure.
 
Well Schumacher is out of stock and I doubt they will be anytime soon.You might try Mancini or Bob Mazzolini as they might have some in stock. Trans Dapt don't make them for B bodies.You may want to look for used Big Block engine brackets(you don't have the ones from the 361 ?) the insulators are readily available most places.

Yeah, I also need a set
For the 63 Polara
I have spoken with Schumacher and the reason is the Subcontractor has a tooling issue (?)
Bob Mazolinni is only 110 miles down the street from me...He's the guy I bought my 1970 Hemi from
Thanks for this post Darter6
 
Looking for a source to buy a complete set of motor mounts to put a 440 into a 63 fury,the fury had a 361 so its got the big block kmember,any pics and info on where to get mounts ,thanx in advance
Call Joe Souchy
 
There isn't a BB K frame. It's a V-8 K frame. If you have mounting brackets from the 361 they will work on the 440. Just need the insulators if you don't have those from the 361. Also those aren't BB, just V-8.
As stated call Joe Suchy.
 
FYI, Buy the one that interlock or use a torque strap ! I ripped mounts left & right when I was playing around ! Well always Left mount ! haha. Enjoy!

20160616_083229.jpg
 
There is a guy who re-pops the brackets and the inserts can be bought any part store.
 
Schumacher Poly Locks are good mounts. The biscuit style mount is famous for coming apart. Mainly the left one and especially with a 4-spd.
 
Yeah, Mike is having issues with the manufacturer not making the parts.
 
There isn't a BB K frame. It's a V-8 K frame. If you have mounting brackets from the 361 they will work on the 440. Just need the insulators if you don't have those from the 361. Also those aren't BB, just V-8.
As stated call Joe Suchy.
Thanx everyone,Ill call joe and also check
So I looked up Bob Mazzolini and their store says the have 'um #SKU 81476. I would call to be sure.
thanx
 
I found two sets of NOS on ebay. They're your best bet for longevity, made in usa.
20160731_124221.jpg


Here's the brackets off my '62 361, installed on my 440. Don't mix them up. (2228 driver's side)
20170302_161652.jpg

2227 passenger side
20170302_161710.jpg
 
Looking for a source to buy a complete set of motor mounts to put a 440 into a 63 fury,the fury had a 361 so its got the big block kmember,any pics and info on where to get mounts ,thanx in advance
If you still have the 361? The brackets and insulators will work on the 440! The insulators are available at NAPA Inexpensive too!
 
The 62 Dart I picked up is a slant car, and I figured Schmaker made a conversion brackets for it but guess not! And he is out of almost everything anyway! Looks like a hunt for a v8 k and do the swap. It is getting hard on this woreout 71 years geezer to do such, especially in 110 degree SW Texas! !!!
 
Auto Transport Service
Back
Top