Tim L Stockwell
Member
Does anyone know what this is called and where I may find one?
Tim
Tim
I thought so. I have the bracket, but the rubber is gone. On my bracket where the rubber should be I have a rectangle slot. Does that sound correct to you? I can seem to find a replacement. I also found out I have the 9 1/4" differential.are you talking about your pinion snubber? View attachment 813593
Think the one I posted won't fit that bracket.I thought so. I have the bracket, but the rubber is gone. On my bracket where the rubber should be I have a rectangle slot. Does that sound correct to you? I can seem to find a replacement. I also found out I have the 9 1/4" differential.View attachment 813617
This will not work for me. I have a 9 1/4" differential.
So Fran, are you saying what I showed and what Tim showed is for a different size diff? Mine is an 8.75 as you might be able to see in the pictures, so who knows how it got on there if that is true.Wonder if you'd be better off modifying your bracket to fit the 8.75 bumper? $15.10 Unjess you gotta have original.
That ebay part not mine.
Do you want to part with the old one? It would be better than none at all. Or can you tell me the part number and where I can find one.Here is the one you need. I could not find one from any source, but I was able to find a NOS one for too much money, but needed it.
Here is the original
View attachment 813652
View attachment 813651
New one installed on the car.
View attachment 813653
Its just the fun with Ma Mopar mixing stuff up! LOLThink they go by body type rather than rear end other than Dana. Dana is different. 8.25, 8.75 and 9.25 should take the same ones. A, B and E take different ones.
I think, not positive .
Well, maybe not, its ripped, but i am amazed that nobody makes a reproduction one that is correct.Do you want to part with the old one? It would be better than none at all.