Best dual master for m/w manifolds

crossram 426 · Aug 9, 2019

Looking for best dual master for 63 dodge with m/w exhaust manifolds...Don't want it too close for heat etc. Cheers in advance.

Mike67 · Aug 10, 2019

They make an offset bracket for Hemi cars im not sure if that moves the booster & MC closer to the drivers side fender or raises it higher...

miller · Aug 10, 2019

Pretty sure most use a heat shield, under the master, too.

VANDAN · Aug 10, 2019

I just picked up a complete set up, to convert my '63 Dodge to Front disc, at Carlisle this year. I believe it's the common A-body change over kit, to use on most mid-60's, to early 70's. I've seen these installed on other similar M/W Cars, and they do fit. I do plan to fab a heat shield to keep it cooler.

miller · Aug 11, 2019

Yep. Same one on my clone, with disc/drum set-up.

crossram 426 · Aug 12, 2019

VANDAN said:
I just picked up a complete set up, to convert my '63 Dodge to Front disc, at Carlisle this year. I believe it's the common A-body change over kit, to use on most mid-60's, to early 70's. I've seen these installed on other similar M/W Cars, and they do fit. I do plan to fab a heat shield to keep it cooler.View attachment 814833

if I may ask, which kit did you get and from whom? cheers Matt

VANDAN · Aug 13, 2019

crossram 426 said:
if I may ask, which kit did you get and from whom? cheers Matt

Matt, I got the kit(s) from Right Stuff. They included Complete Disc change over components, upgraded to drilled-slotted rotors, the M/C, all the brake lines, front to back, and also included the rear axle lines, to fit a Dana, as that is what I'm using. It's supposed to be "plug & play", so I'll find that out. They also included Free shipping to my home, so I didn't even have to lug all the parts back to my truck during the Show. They also had a Nice Show Special Discount going, so I ended up buying another similar kit for my '65 project...

Glenwood · Aug 13, 2019

Do you happen to have a part number for the kit? Their website does not list a conversion kit for early B's, at least not for a 64 Dodge.

MW 413 · Aug 13, 2019

My 62 Belvedere set up with 4 wheel Willwood Discs. Made heat shield that drops temp by 80%. 15/16" MC bore for correct pedal travel and effort.

VANDAN · Aug 13, 2019

Glenwood said:
Do you happen to have a part number for the kit? Their website does not list a conversion kit for early B's, at least not for a 64 Dodge.

I'll let you de-cipher the writing on the receipt:

The # with 62 is for a MW install, the 65 is for BB application.

Glenwood · Aug 13, 2019

Thanks. MDC62SD is the conversion kit. It's on sale for $540.

Best dual master for m/w manifolds

crossram 426

Well-Known Member

Mike67

Well-Known Member

miller

Well-Known Member

VANDAN

FBBO Gold Member

miller

Well-Known Member

crossram 426

Well-Known Member

VANDAN

FBBO Gold Member

Glenwood

Well-Known Member

MW 413

Well-Known Member

VANDAN

FBBO Gold Member

Glenwood

Well-Known Member

Similar threads