• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Will this rotisserie fit 69 GTX?

Kevin Bisgrove

Well-Known Member
Local time
3:24 AM
Joined
Sep 22, 2018
Messages
373
Reaction score
108
Location
Victoria, BC
See photos. He say it is 2200lb from KMS tools.
Will this fit my car?
Any modifications or is it pretty straight forward?

Resized_20190826_195011.jpeg Resized_Screenshot_20190825-191310_Google.jpeg
 
The bare shell I'd say yes.
 
The bare shell I'd say yes.
Thank you. Yes I was assuming the bare shell. Was only concerned about the length overall. I see many that fit Chevy's that pull down further than the Mopars with only the firewall left once stripped.
 
The overall length is governed by the adjustable center tube. Measure to be sure.
 
There is nothing about that unit that can't be made to fit the GTX. You'll probably have to fab the rear mounts (I have measurements for those). The center tube is a non issue - just get a longer tube if necessary. What's the asking price?
 
You can make it fit if you have to.
 
The rear mounts are easy. The front mounts you can buy from Auto Twiler.
P6110104.JPG
DSCF8622.JPG
The rear mounts are just 1-1/2" angle iron.
 
He’s in Canada - buying from auto twirler will be a pain in the *** and shipping will be ridiculous!
 
If you want it go over there with cash,then you'll know if your'e wasting your time or not.I hate that ****.
 
NO, renting is NOT a good idea !! No project is ever completed in as short of a time as you think. You'll end up paying more in rent than the thing is worth.
 
Auto Transport Service
Back
Top