• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Can anyone recommend something similar? Splice

V

velrob

Well-Known Member
Local time
9:33 AM
Joined
Jan 15, 2016
Messages
603
Reaction score
110
Location
toronto
Looking for something similar. Was thinking electrical push in marrets but not sure it's a good idea. Anything better?

IMG_20190828_153459.jpg
 
Are you looking for a "bullet" style push-in male connector to fit what I think you're showing?
Mike
 
I'd like to connect 3 wires to 1 in same fashion. Doesn't need to be original
 
IIRC, the factory soldered connections like that then taped it up.......?
 
Something I could disconnect easily lol. I'd do that last resort of course
 
No I mean looking for the plugs where I can make my own not where it goes
 
I wasn't saying where it went.. I was suggesting you can probably get one from someones old pulled OE dash harness.
 
http://www.delmarwire.com/
Calling gets best results. He's got lots of stuff and can usually figure out what you're wanting over the phone. That 'rare' customer service that you don't get much anymore....at least that's been my experiences.
 
Triumph cars have a few triple bullet couplers in their light system.
 
I have a bunch of those. Wasn't sure if they would be ok in a car? I think those are for home.electrical boxes. Anyone use them?
 
velrob said:
I have a bunch of those. Wasn't sure if they would be ok in a car? I think those are for home.electrical boxes. Anyone use them?
Click to expand...

If they are lever type Wego connectors they are 100% good for automotive.... The push in with no lever work but not nearly as well..

These are for 12-28 ga wire.. If your looking for 8 or 10 ga it's a different connector
 
Great thx. I'll use them they are convenient. They are exact same style you sent a link for.
 
If you're gonna use a wego, or even a kerney like up in the picture, do what you can to ensure they won't loosen up with time & vibration. Can't tell ya how many non-working light fixtures I've opened up just to find a wire popped out of the wego:D
 
I plan to tape them as well. That's what my main concern was. They would pop out from the vibration.
 
You must log in or register to reply here.

Similar threads

Eggo
Faltering with high revs
Replies
16
Views
864
dadsbee
dadsbee
1st Charger
'73 Charger acts like she wants to turn over, but will only intermittently
Replies
4
Views
362
padam
padam
real0803
Alternator upgrade suggestions advice
Replies
18
Views
910
72RoadrunnerGTX
72RoadrunnerGTX
cal30_sniper
Hemi car rear leaf spring braces
Replies
8
Views
992
cal30_sniper
cal30_sniper
Hubert
Cold starting Issues
Replies
4
Views
459
Hubert
Hubert
Auto Transport Service
Back
Top