JackGTX440
Member
Hi everyone, new to the forum here. I was wondering if anyone knew what factory valve lash is for a 426 max wedge. Thank!
-Jack
-Jack
sorry i thought that some info would be there.That site looks like a great resource. Unfortunately a '63 service manual isn't on there...
Welcome to the group!!
I have a question for you. We chat a bit here about rarity in parts and "the things that used to be". A maxie cam and lifters, meaning factory original parts would be a rarity indeed. Do you have a .507/300 or the .520/300 used in '63? The reason I ask is that if your query was about something that is not factory stock parts, then the lash question is for the cam builder, and not what the factory specs are, even if we are talking Mopar Performance Purple Stripes, etc. Unless of course you are just doing research. Lefty71
Thank you! This is what I needed!Factory cam lash:
.028" Intake
.032" Exhaust
Isn't that for a 426 Hemi?Factory cam lash:
.028" Intake
.032" Exhaust
Isn't that for a 426 Hemi?
My point is cam profile doesn't seem to effect lash all that much. (At least in the big block world.) I would be curious of performance SB builds?what grinds?
some of their older ones used those numbers
nothing wrong with that- they were milder than todays max cams
but you can do a modern cam that's easy on the valve train and tight lash
just BVVC that you are not getting a 40 year old cam design
like the "30-30"
My point is cam profile doesn't seem to effect lash all that much. (At least in the big block world.) I would be curious of performance SB builds?