Comp Cams dowel pin

roadrunnerh · Sep 1, 2019

My new Summit timing chain set (Cam gear) will fit on my original cam and the dowel is flush with the face of the gear. On this new Comp Cams cam, the dowel on the cam protrudes above the face of the cam gear - I can not tighten the cam bolt, washer interferes. WTF?

Anyone experience this?

vance.dykes · Sep 1, 2019

take a brass hammer to tap on the pin to make sure it is bottomed out in the hole then grind it down to just below the hole. or call the cam maker and ask them.

roadrunnerh · Sep 1, 2019

vance.dykes said:
take a brass hammer to tap on the pin to make sure it is bottomed out in the hole

Problem solved - Thank you!!

vance.dykes · Sep 1, 2019

roadrunnerh said:
Problem solved - Thank you!!

your welcome

Comp Cams dowel pin

roadrunnerh

FBBO Gold Member

vance.dykes

Well-Known Member

roadrunnerh

FBBO Gold Member

vance.dykes

Well-Known Member

Similar threads