• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

66-70 B body convertible top boot

JimCoronette

Well-Known Member
Local time
8:16 PM
Joined
Oct 30, 2018
Messages
859
Reaction score
1,216
Location
Cold Spring, NY
I'm looking for a picture of how the boot ties into the rear seat.

The outer perimeter is snapped in, but I cant seem to find a clear picture of where the front part of the boot goes.

Does it go into the filler panel behind the rear seat?

I'm looking specifically for 66-67 Bs.
Not sure if 68-70 is the same.

Thanks in advance.
 
Last edited:
Screen Shot 2019-09-06 at 16.49.36.png
They are all the same even E bodies are the same... There is a plastic key sewn to the boot & an aluminum channel screwed to the back of the seat.... Slide the key in the channel & snap the clips on & your done...

The channel shown is for a chevy it's similar to the Mopar design..
 
It looks like a seat welt bead and it's sewn into in straight part of boot behind rear seat top. It slides into piece posted in post #2.
 
The outer perimeter is only snapped in on 1966 and 1967.

1968-1979 is clipped under the trim, the factory didn’t use snaps on the trim.
 
Auto Transport Service
Back
Top