What do you want for the three speed wiper motor and linkage?
FOR SALE Parting a rough 1971 Satellite
- Thread starter YY1
- Start date
- Status
moparzepjr
Active Member
Hi I have spoken to you before about frame rails...what I need now is a portion of the firewall/cowl behind the master cylinder. if you would be willing to cut the section out and ship it I would be interested and grateful.. can you PM me so we could talk about it?? thank you!
Send me a pic showing exactly what you need, my 71 Charger might be a candidate
moparzepjr
Active Member
send it on here or can I text it to you? it will have to be tomorrow as it is outside right now and dark out. thanks for getting back to me so quick...
YY1
Well-Known Member
No skimming my sale thread please.
I worked hard to get this car, post pics and harvest parts.
if you want to offer the same parts I'm selling here, start your own thread please.
I'll be happy to investigate sheet metal requests.
Possibly this weekend.
I worked hard to get this car, post pics and harvest parts.
if you want to offer the same parts I'm selling here, start your own thread please.
I'll be happy to investigate sheet metal requests.
Possibly this weekend.
moparzepjr
Active Member
Hi YY1
I am interested in the cowl or any of the ends of the cowl above the door hinges and the part above the mastercylinder.
don't mind piecing! How can I send you pics of what I need? Let me know at your leisure. Thank you
I am interested in the cowl or any of the ends of the cowl above the door hinges and the part above the mastercylinder.
don't mind piecing! How can I send you pics of what I need? Let me know at your leisure. Thank you
YY1
Well-Known Member
the cowl has been blocked off with sheet metal over the vents.
that leads me to believe it may have been leaking.
can you post on this thread after circling the area of interest with MS paint?
that leads me to believe it may have been leaking.
can you post on this thread after circling the area of interest with MS paint?
B.Mike Roberts
Active Member
Driver fender by chance and complete firewall
Thanks
Mike
Thanks
Mike
moparzepjr
Active Member
sorry took so long for the pics. I would really like the whole cowl but the two areas inside the blue painters tape would help me tremendously!! pm me if you find you have something for me and how much you would need for them if you do...Thanks soooo much for checking!!
YY1
Well-Known Member
I will need to pull the fenders and see what exactly the reason for the sheet metal covering the vent screen ares is.
It will likely take some time but I have to pull the one good fender anyways.
It will likely take some time but I have to pull the one good fender anyways.
moparzepjr
Active Member
Ok thanks! If you would have the sections I could use how much do you think you would need for them? I have a 74 roadrunner parts car and that cowl looks the same other than the inner fender brackets and cowl to inner fender support. However it's as bad as the car I'm working on...
I am looking for a Auto Trans kickdown linkage from trans to carb
YY1
Well-Known Member
@moparzepjr
Got the pass fender off yesterday.
I initially thought the cowl portions might be usable.
After I took the pics, I removed the lower windshield trim and discovered a thin sheet metal patch riveted in and bondo'd over.
The forward areas look OK, but it looks like you need under the windshield as well.
Sorry.
Got the pass fender off yesterday.
I initially thought the cowl portions might be usable.
After I took the pics, I removed the lower windshield trim and discovered a thin sheet metal patch riveted in and bondo'd over.
The forward areas look OK, but it looks like you need under the windshield as well.
Sorry.
- Status
Similar threads
- Locked
- Locked
