• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Cruise control lever harness and connector wanted

Status
Not open for further replies.

Bob Nossal

Dodgefor72
Local time
5:31 AM
Joined
Jul 16, 2017
Messages
323
Reaction score
69
Location
Milford, MI
Feedback: 5 / 0 / 0
I have a nice 4 wire cruise control lever that someone cut-off the connector end. I would like to repair the lever. Does someone have a 4 wire lever that would be a good donor?
 
I attached a photo of exactly what I need. I believe these connectors were the same through the 1970's.

IMG_6566.JPG
 
You can get the terminals and plug on electrical suppliers. They are called molex and the plug is a standard on electrical world. In fact the ATX PCs power suppliers use these on a couple of configurations
 
Last edited:
Last edited:
I have an ice maker (in a Whirlpool ref) that also uses that connector!
 
There are two kind for those.. one with diagonal cuts on sides and the other one with a pointing cut on one side

Both are available
Amp_and_Molex_Connectors.jpg
 
AMP connector is computer (3.5") HDD power.
 
I allways keep searching untill find the best price buddy :lol:


There are similar prices around by piece but buying a 4 or 10 pieces set. What I couldn't find is being sold just the male or female, that just at the electrical suppliers websites.

( note that seller is in Hong Kong but is free shipping. Should be delivered in USA in a couple of weeks or so )
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top