wyrmrider
Well-Known Member
There were comments a while back on quench in hemis
I stated that we used to run the pistons close to the walls
or
with a larger bore motor could use that step
or
we used to weld up the heads
Now
https://forhemisonly.com/wp-content/uploads/2016/04/porting-custom-race-head.jpg
160 cc chambers
Flow numbers-654cfm Intake/380cfm Exhaust
I stated that we used to run the pistons close to the walls
or
with a larger bore motor could use that step
or
we used to weld up the heads
Now
https://forhemisonly.com/wp-content/uploads/2016/04/porting-custom-race-head.jpg
160 cc chambers
Flow numbers-654cfm Intake/380cfm Exhaust