WTB Many 1970 Charger Parts needed

Im in the process of putting together a 1970 Charger R/T with a 440 that was left for dead and was going to be crushed. It was pretty badly stripped of anything of value. During this I obviously came across a lot of issues with parts I don't know I need yet. I will keep this thread updated based upon the parts I need. If there is something that usually goes with the part that I did not add in here, please mention it! Please keep checking back from time to time, as it will definitely continue to change!

Start of the Car:


Where it sits now:



Parts needed:

Interior
Seatbelts (black)
Console (4 speed, black)
Steering Column (Power Steering)
OER/OEM Wood Wheel (dark)
Inside door handles
Carpet (black)
Shifter boot
Shifter chrome ring
Non-OEM Hurst Pistol Grip shifter for A833
Dome Light
Visors (black)
Package Tray Cover

Engine/Bay
Speedometer cable
Windshield wiper bottle
windshield wiper pump
Power steering pump and bracket (440)
A833 clutch fork
Long Tube Headers

Outside/Trim
Side Mirrors (both passenger/driver)
Outside Door Handles
Tail Light Finish Panel
Aftermarket R/T Door emblems
Grill R/T Emblem
Fuel Tank Straps
Door Locks/Trunk Lock

Lights/Electrical
reverse lights
OER/OEM Tach
Tach Signal wire
DR/Parking Lights
Reverse lights

On your interior door handles, do you need the mechanisms, chrome handles or both?

'68 Charger said:

On your interior door handles, do you need the mechanisms, chrome handles or both?

Click to expand...

Chrome handles, I already have the mechanisms that allow me to open the door from the inside. How those chrome handles mount to them is beyond me at this point.

P.m.sent

I have seat belts, console top plates, inside door handles, dome light housing (silver part only), visors, trunk latch mechanism (no lock mechanism) and parking lights. These are from a 68, not sure if it's all the same on a 70. If you're interested and send me your email address I can send pictures.

vita said:

Chrome handles, I already have the mechanisms that allow me to open the door from the inside. How those chrome handles mount to them is beyond me at this point.

Click to expand...

Okay thanks. I have the mechanisms only. I do have the chrome handles but they're pitted.

They attach to the mechanism with one bolt. There's a threaded bolt hole on the front facing of the mechanism that receives the bolt. The chrome handle has a hole on the backside for the bolt to go thru. I think the hex head for the bolt is 7/16.

Responding back to messages! I greatly appreciate the responses! I did have a death in the family and will be traveling for the next week or so. I will stay on this as best I can.

If you care to email me, [email protected]

vita said:

Responding back to messages! I greatly appreciate the responses! I did have a death in the family and will be traveling for the next week or so. I will stay on this as best I can.

If you care to email me, [email protected]

Click to expand...

Sorry, that sucks. Taking care of matters is most important.

Sorry to hear about your loss. I have reverse lights and washer pump, PM me if you still need them

Sorry to hear. I have sent you a email to you with parts I have let me know what you want. Thanks Duane.