69 RR Trunk Hemi Measurements
- Thread starter chtampa
- Start date
Here is a 68. Hope this helps! Courtesy of Moparts.com.
![20190918_114658_resized[314].jpg](https://www.forbbodiesonly.com/moparforum/attachments/20190918_114658_resized-314-jpg.836378/ "20190918_114658_resized[314].jpg")
I looked on Google Images and found that. I'll look again!
This is the best I can do! I found this pic on Google Images. If you want to,
you can put a measured grid over the pic and get the almost perfect location????
you can put a measured grid over the pic and get the almost perfect location????
I know it's out there . . . Somewhere! Try looking on Moparts.com.
4mulas
Well-Known Member
- Local time
- 7:08 PM
- Joined
- Mar 16, 2017
- Messages
- 1,914
- Reaction score
- 2,059
- Location
- Just North of Montana
1969. On the inside of the trunk there are two little access holes for the nuts to be installed. You can use that as a guide.
Ranger16
Well-Known Member
Why do you want to drill holes in your trunk? Why not use 3M double sided emblem tape?
First of all, Me thinks CHTAMPA may be using a different deck lid with no access holes already there. Maybe one that didn't have a HEMI in it.
Secondly, the original emblem was attached with stamped nuts from behind, and Turdly, with the price of those emblems today, I wouldn't
want someone at a car show ripping it off if it was suck on. Sorry I couldn't help more.
Secondly, the original emblem was attached with stamped nuts from behind, and Turdly, with the price of those emblems today, I wouldn't
want someone at a car show ripping it off if it was suck on. Sorry I couldn't help more.
Similar threads
