• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Indy valve cover BB mopar

Status
Not open for further replies.
I’ve got a set. They have 1 breather hole with baffle in each cover. I’ll post some pictures if you’re interested.
 
Not trying to kill anyone's sale BUT ... Indy's are very poorly cast and the no-name ones have a large area where they must switch out the nameplate in the molds. For the same money as a used set of Indys you could but a set of polished cast units from another vendor and the ones I'm thinking of look identical to Indys - just a much better casting and finish. Try Mancini or Summit.
 
Not trying to kill anyone's sale BUT ... Indy's are very poorly cast and the no-name ones have a large area where they must switch out the nameplate in the molds. For the same money as a used set of Indys you could but a set of polished cast units from another vendor and the ones I'm thinking of look identical to Indys - just a much better casting and finish. Try Mancini or Summit.

I powder coated a set of Indy covers and they look pretty good to me!

IMG_3866.JPG
 
The powdercoat hides a multitude of sins !! Anyhow, whatever floats your boat. Just sayin' - I have a pair of plain Indy ones and for much less money there are WAY better castings out there.
 
I have a set of those you are talking about on my car now. When I checked the rails on them when they were new, not even close to being flat from end to end. I have a set of the no name Indy’s and they are straight and flush. Just was trying to get another set or two so I can put Hendry Racing on them.
 
Indy castings ... they actually "look" like rust-pitted steel !!
IMG_1647.JPG
IMG_1648.JPG
IMG_1649.JPG
IMG_1650.JPG
IMG_1651.JPG
 
I have a set of those you are talking about on my car now. When I checked the rails on them when they were new, not even close to being flat from end to end. I have a set of the no name Indy’s and they are straight and flush. Just was trying to get another set or two so I can put Hendry Racing on them.
A guy that races at out track has Hendry Motorsports on his stuff. Kim
 
The powdercoat hides a multitude of sins !! Anyhow, whatever floats your boat. Just sayin' - I have a pair of plain Indy ones and for much less money there are WAY better castings out there.

Actually if the job is done properly, powder coating is only a few mils thick; part numbers and metal defects still show.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top