wahya
Well-Known Member
He called me out to the shop area and explained that with both cam bolts out as far as they would go, there was still a -2* plus on the camber and told me that something wasn’t right and thought maybe the new uppers were too short.
Well I took the car home (71 sat) set the ride to about 1 1/2 inch and I’m now at this, about 1/4 inch inward at top of rim.
These lower control arms (installed) are supposed to be for 70-72 b body, but maybe a little bit long its hard to tell. The holes for the shock absorber bolts don’t look the same for sure. Was wondering if the 1/4 inch would translate to about 1 degree negative camber, or go back to the old lowers that are in fine condition except for bad bushings.
Last edited: