What intake will fit .

c.moo · Sep 24, 2019

Can't fine thread on this and tried to google it. Seen it some where . Here goes , what's the tallest intake , carb , air cleaner can you use on 1963 plymouth bev. with 440 using stock motor mounts with out cutting on hood . Thanks

BeepBeepRR · Sep 24, 2019

There are a lot of single plane intakes out there that will work, you wont have problems until you get into the single plane hi rise intakes. Mopar Performance M1 etc etc...

Here is a whole topic on it in another forum... Have fun reading..
http://www.cuda-challenger.com/cc/index.php?topic=90457.0

another topic here..
https://www.forbbodiesonly.com/moparforum/threads/72-rr-440-intake-height.8932/

Mr Belvedere · Sep 25, 2019

c.moo said:
Can't fine thread on this and tried to google it. Seen it some where . Here goes , what's the tallest intake , carb , air cleaner can you use on 1963 plymouth bev. with 440 using stock motor mounts with out cutting on hood . Thanks

I have a single plane M1 on a 440 in my 64. (Motor moved back with the later 66 and up K) Just had to trim a stud on the hood trim as it was just touching the aftermarket air cleaner.

Previously had a 6 pack setup with no issues with stock style K or after motor moved back.

Dodge 330 · Oct 2, 2019

A Holley Street Dominator single plane intake fits under a stock hood and gives great power.

What intake will fit .

c.moo

Well-Known Member

BeepBeepRR

Well-Known Member

Mr Belvedere

Well-Known Member

Dodge 330

Well-Known Member

Similar threads