moparjohnny
Well-Known Member
anyone knows who sells those? thanks
inner doors plastic water shields
- Thread starter moparjohnny
- Start date
Sixpactogo
Well-Known Member
Mega Parts has them
bee71
Well-Known Member
Legendary.
bad88ttop
Well-Known Member
Just make them, very easy to do: You can even by the glue/tape at HOme Depost or Lowes for the factory look.
SaddleLight
Active Member
I made mine this weekend out of the plastic that a mattress was wrapped in, based off a post I found here. I also used butyl caulk as the adhesive, don't do that. Go find butyl tape or rope, holy crap was caulk a mess.
Dibbons
Well-Known Member
- Local time
- 10:46 AM
- Joined
- Nov 29, 2014
- Messages
- 4,751
- Reaction score
- 5,459
- Location
- La Paz, B.C.S., Mexico
Don't use silicone, it just falls off later.
slimt
Well-Known Member
Ya the dum dum works well. Easy clean up if required. Doesnt smear all over like all other stuff and its a clean result.
cr8crshr
Well-Known Member
- Local time
- 9:46 AM
- Joined
- Feb 13, 2009
- Messages
- 6,586
- Reaction score
- 11,759
- Location
- Northwest Nevada
I have a complete set that I need to get rid of. CHEAPLY!!! Just want the set gone!!! Pm me if you have an interest and we can discuss it. Again, not wanting a lot of $$$'s...cr8crshr/Bill
SaddleLight
Active Member
yeah, ill be surprised if my door panels aren't glued on as a result of this flop. lmao!
Cornpatch MO
Well-Known Member
You don't need a whole ribbon of dum-dum. Just some small balls of it spaced around the door about every 6 ", and press your plastic into it with your thumb. Easy to take off if you ever need to............MO
- Local time
- 12:46 PM
- Joined
- Jan 29, 2018
- Messages
- 19,376
- Reaction score
- 63,278
- Location
- Midland Ontario, Canada
Draft seal cord is available at most hardware stores for just a few dollars. The whole idea is to make the area water proof from leakage through the glass seals/felts and condensation so it doesn't get to the door panel backings. You want it sealed tight on THREE sides and tucked into the slot at the bottom and taped so any water intrusion runs into the rockers.
Slap Stick
Well-Known Member
But on E bodies the door panels are plastic....and they are junk.
They were still using the same stuff in 92.....still junk.
They were still using the same stuff in 92.....still junk.
Similar threads
