Ray70Chrg
Well-Known Member
I,m at the point of putting the ac/heater control panel back together again and don't know what order the cardboard pieces go into the slide assembly. Can anyone help please.
What the heck is that? I have a '70 Charger and I have never seen those!
Thanks 1Wild R/T for the info. Does the flat side go into switch assy. first? Only 1 of them has a small tab on the flat side, what is its function? Each piece (except one) ends with a thin protrusion and a wider protrusion at the other end. Should they be stacked on top of each other that way? It seems they will all move in unison when any of the slides are pushed. Thanks for your help.Considering the switch isn't designed to be opened & they actually melt the little posts to keep it together very few have opened one... Also new complete switches are/were available... They use to be cheap, Last one I bought was $15... I'm betting thats no longer the case... Just checked $120....
Thanks 1Wild R/T for the info. Does the flat side go into switch assy. first? Only 1 of them has a small tab on the flat side, what is its function? Each piece (except one) ends with a thin protrusion and a wider protrusion at the other end. Should they be stacked on top of each other that way? It seems they will all move in unison when any of the slides are pushed. Thanks for your help.