• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

MAX WEDGE TOP END...

coloradodave

FBBO Gold Member
FBBO Gold Member
Local time
6:11 AM
Joined
Jun 1, 2011
Messages
3,736
Reaction score
3,113
Location
Lincoln, CA
I posted an add for my max wedge heads, manifold, carbs, air cleaners, etc. in the mechanical parts for sale forum. Supply your 413, 426 or 440 short block and you'll have an instant hit at the next car show or cruise in...
DSCN3595.JPG
 
Last edited:
Yep. Just like the first line of this post states...
 
You're trying to get rich for some mediocre parts?!? JMO

If you want to comment on my prices or anything else just PM me. And at the same time, try reading the rules about "For Sale" ads for this site. You can read, can't you? BTW, if $6,000. is your definition of rich, maybe I should just GIVE YOU the parts.
Or, as an alternative, you could go find a good set of max wedge heads, have them ported, install new valves, springs, retainers, locks, get a fresh valve job & buy a new set of ARP head bolts. Buy a set of Comp Cams Magnum roller rockers and a couple of sets of Trick-Flow pushrods.
Then find a factory crossram manifold in good condition, have it ported to match, buy the linkage assembly, screw plugs, return spring brackets, hold down bolts, dual choke cable, 2 new Edelbrock 500 cfm carburetors, spacers & studs. Next, buy 2 Edelbrock calibration kits and build a Uni-syn tuning tool. Then find 2 reproduction air cleaners. Add some extra air filters and spare 4 bolt valve cover gaskets. Oh, make sure you media blast all the parts that need it and paint everything so it looks great.
When you've assembled all of the above, add up what you spent, in dollars, not time. Place an ad for 40-50% of that and have some yahoo tell you you have mediocre parts and are trying to get rich...some days it doesn't pay to get out of bed.
 
Last edited:
If you want to comment on my prices or anything else just PM me. And at the same time, try reading the rules about "For Sale" ads for this site. You can read, can't you? BTW, if $6,000. is your definition of rich, maybe I should just GIVE YOU the parts.
Or, as an alternative, you could go find a good set of max wedge heads, have them ported, install new valves, springs, retainers, locks, get a fresh valve job & buy a new set of ARP head bolts. Buy a set of Comp Cams Magnum roller rockers and a couple of sets of Trick-Flow pushrods.
Then find a factory crossram manifold in good condition, have it ported to match, buy the linkage assembly, screw plugs, return spring brackets, hold down bolts, 2 new Edelbrock 500 cfm carburetors, spacers & studs. Next, buy 2 Edelbrock calibration kits and build a Uni-syn tuning tool. Then find 2 reproduction air cleaners. Add some extra air filters and spare 4 bolt valve cover gaskets. Oh, make sure you media blast all the parts that need it and paint everything so it looks great.
When you've assembled all of the above, add up what you spent, in dollars, not time. Place an ad for 40-50% of that and have some yahoo tell you you have mediocre parts and are trying to get rich...some days it doesn't pay to get out of bed.
This isn't a For Sale thread. It's a shameless bump thread, so comments are welcome.
 
Exactly & well put

I guess neither one of you geniuses bothered to read my post about how you can gather your own parts and SAVE all that money. Since I doubt whether either of you actually are interested in purchasing any max wedge items from anybody, at any price, I find it interesting that you spent the time to "comment" on my ad. You both must lead awfully lonely lives...
 
I guess neither one of you geniuses bothered to read my post about how you can gather your own parts and SAVE all that money. Since I doubt whether either of you actually are interested in purchasing any max wedge items from anybody, at any price, I find it interesting that you spent the time to "comment" on my ad. You both must lead awfully lonely lives...
I already have the parts I need ON MY CAR!!

20180824_192927.jpg
 
I guess neither one of you geniuses bothered to read my post about how you can gather your own parts and SAVE all that money. Since I doubt whether either of you actually are interested in purchasing any max wedge items from anybody, at any price, I find it interesting that you spent the time to "comment" on my ad. You both must lead awfully lonely lives...
Well super genius I did read it & I've come to the conclusion that you must be an idiot for having that much money into those parts which your trying to pass your butthurt off to somebody else. At best if you parted everything out you might get a little more half your price let alone none of those parts are good for any restoration pieces since you butchered them up just to look cool.
BTW I have enough max wedge & hemi parts the last thing I'd look at is your overpriced butchered up junk!!


8121095.jpg
 
Ahhh, about what I'd expect from someone from Anusville. Are you two brothers?
Anyway, this isn't going anywhere so I am disengaging. Continue to comment amongst yourselves after I'm gone...
 
Ahhh, about what I'd expect from someone from Anusville. Are you two brothers?
Anyway, this isn't going anywhere so I am disengaging. Continue to comment amongst yourselves after I'm gone...
Please go back to your regular scheduled libtard channels
thank-you-meme-22.jpg
 
lol this was entertaining, I would go aftermarket aluminum for this type of coin but there’s likely someone out there looking for this stuff and will pay for it.
 
Auto Transport Service
Back
Top