• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Hemi low deck 400 cast block

Status
Not open for further replies.

blown away

Well-Known Member
Local time
5:36 PM
Joined
Apr 11, 2012
Messages
67
Reaction score
12
Location
neche
Feedback: 0 / 0 / 0
Contact seller
E1C02F77-2F26-4F42-8FC0-413A9939148F.jpeg
09E5B4DC-1682-4EA8-AA67-33B92988D9CF.jpeg
07DB471D-ED67-4AB6-AA4B-D5EAD762D4CF.jpeg
28626088-C329-4204-BD40-0C330BEA1402.jpeg
021B24D2-77E4-4415-B0BC-FD18CB216203.jpeg
13FB4710-CD16-4951-9E16-EAE6835BA439.jpeg
C21556AF-7128-4525-B11D-F214AD4752FD.jpeg
for sale low deck cast iron 400 block that uses 426 hemi heads that Charlie malyuke made fr his dodge colt pro stock and John hagen, wally dyck bought this block and set records with it in a FED. Selling block fr $1600. Plus ride thx
 
Judging by the water pump housing, looks like hard fill is in it, if so, how much?
 
How much hard filled? Or block price? 1600. Plus ride. Half hard filled!
 
Ok, half filled. Thanks!
 
View attachment 871531 View attachment 871535 View attachment 871536 View attachment 871537 View attachment 871538 View attachment 871539 View attachment 871540 for sale low deck cast iron 400 block that uses 426 hemi heads that Charlie malyuke made fr his dodge colt pro stock and John hagen, wally dyck bought this block and set records with it in a FED. Selling block fr $1600. Plus ride thx

Any issues with it ? Doesn't look half filled in the freeze plug holes , maybe just around the top of the block where the interior head bolt bosses were added . Any cracks around them ? Hard to tell dirty as it is .
Do standard hemi heads fit it ?
How much overbore ?
Where would it be shipped from ?
 
they way the pan rail is
ground out was for return oil faster,that block is very close to this low deck hemi

ProMotor.jpg
 
Any issues with it ? Doesn't look half filled in the freeze plug holes , maybe just around the top of the block where the interior head bolt bosses were added . Any cracks around them ? Hard to tell dirty as it is .
Do standard hemi heads fit it ?
How much overbore ?
Where would it be shipped from ?
Yes std hemi heads fit. It can be shipped frm from neche North Dakota thx
 
not sure about the combination they used,they could of used a 426 or 440 crank,or low deck crank,i did have a race motor they open up the mains for rb crank instead of cutting down a rb crank to low deck mains
 
not sure about the combination they used,they could of used a 426 or 440 crank,or low deck crank,i did have a race motor they open up the mains for rb crank instead of cutting down a rb crank to low deck mains

No info yet ?
 
might be a 383 like this pic,is there casting numbers on the side and date,i know the motor mount ears was milled off,but i do that to all of mine

charlieshemi.jpg
 
Look at the fourth pic a little closer. You can see the casting numbers. 400 block casting 230. Also look at the size of the main webbing dead give away.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top