• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1963 426 Max Wedge engine and “007” 727 trans

Status
Not open for further replies.

bb70duster

Active Member
Local time
3:29 AM
Joined
Jul 24, 2019
Messages
28
Reaction score
55
Location
Hemet, California
Feedback: 0 / 0 / 0
Contact seller
Rare opportunity, 426 Max Wedge engine out of a 63 Plymouth, and its pushbutton 727 trans, Engine is apart, Block is standard bore, correct heads, rockers, Pulleys, water pump, distributor, oil pan and pick up, etc. every bolt is there, cam lifters, pistons, rods, crank... Complete engine minus intake/carbs and exhaust manifold. Trans is also complete, has original Max Wedge converter with large converter bolts, flex plate, and even the trans cooler lines. $6000 takes it all.
Car in pics is the car it came out of back in the 60s. Can get more and detailed pics for a serious buyer.

DF749CD1-C9E3-4EDB-82C7-8D6A90345B36.jpeg 5E5EBFD3-2A3F-432B-B5CD-7B8DE55A7DF4.jpeg D8909F42-BAF4-403A-85CC-A50AA4F3F410.jpeg 9B2580B9-A464-4DF3-875C-FF8F48C908EA.jpeg FD5FCD1A-DB8F-41B9-BC00-0DC98DF9A0A3.jpeg 4871F410-5B51-4167-841D-89180EBEACF2.jpeg A25728B8-C398-4758-9A57-2F0FB5688F09.jpeg FE1A1495-7AD7-4F05-ABF0-8A98E3C9CB7B.jpeg 712D8D13-4CB7-4C20-A18E-98D3C33E021B.jpeg 0D165631-D86C-4B72-BCFA-AE95248ACB5C.jpeg
 
Are you interested in hemi parts in trade?
 
New Manton Stage ll aluminum hemi heads $2500 ?
Ferrea stainless valves, PAC springs, Comp titanium retainers, 10 degree locks, viton seals, custom lash caps. All brand new Ray Barton hot street hemi stuff.... $1200
Heads assembled with valve job...$300
NOS Dick Landy/MP roller intake and exhaust rockers - stock ratio, new adjusters, shafts, stock iron stands. All perfect.
[$3500 replacement cost
 
EARTH TO BB70 DUSTER....

ANY INTEREST IN A TRADE ??????????????
 
Are you going to GUARANTEE heads are crack free and block will pass sonic testing?

Or do l have to take the loss if this is junk?
 
Are you going to GUARANTEE heads are crack free and block will pass sonic testing?

Or do l have to take the loss if this is junk?

I don't have a local shop, the time, or the funds to have them magged, You already said you weren't interested in a cash deal, So I'm unsure why you are harassing my post... I've clearly stated what has been repaired, and what is needed, and at this point, Ive seen the trans alone sell for close to what Id take for all of it... Its obviously just not for you, get over it.
 
If that is the case you should state in your ad that you wont get anything magged and wont guarantee anything is good, instead of trying to sell blue sky with some story for the gullible.
Do you even own this stuff or are just trying to make a buck on someone elses stuff... is that why you wont spend any money or guarantee it?
 
If that is the case you should state in your ad that you wont get anything magged and wont guarantee anything is good, instead of trying to sell blue sky with some story for the gullible.
Do you even own this stuff or are just trying to make a buck on someone elses stuff... is that why you wont spend any money or guarantee it?

I dont think it's allowable to bash a seller in this fashion in a "FOR SALE" Ad. You should start a new thread in the general discussion for this!

@Cranky
@kiwigtx
 
Last edited:
You are right.
I apologize
Ive been trying to get straight answers through personal conversations but all l get back is b.s.
Im done here.
 
If that is the case you should state in your ad that you wont get anything magged and wont guarantee anything is good, instead of trying to sell blue sky with some story for the gullible.
Do you even own this stuff or are just trying to make a buck on someone elses stuff... is that why you wont spend any money or guarantee it?
  1. Do not argue with others in the thread.
  2. Photos may help sell the part/car
Respondants:
  1. You may NOT post commentary in this forum.
  2. You MAY post relevant questions about the item being sold.
  3. Do not negotiate price in the ad. Do this by PM.
  4. No flaming of sellers or their products.
 
  1. Do not argue with others in the thread.
  2. Photos may help sell the part/car
Respondants:
  1. You may NOT post commentary in this forum.
  2. You MAY post relevant questions about the item being sold.
  3. Do not negotiate price in the ad. Do this by PM.
  4. No flaming of sellers or their products.

THANK YOU!
I've welcomed him to come see the parts in person as he lives close by, As for his false allegations, Yes, I own these parts, they're in my garage, They are far from "Junk" As mentioned above, Its a standard bore block, that will either need to be bored, or will need 2 sleeves due to rust, Heads have been cleaned, one has a repair to the coolant passage, all work was done professionally, I bought this engine from a big name shop here in So Cal, probably one of the most known and reputable. The owner (id guess in his 60's) said he bought this engine when he was in his teens. As for the "Sky High" price, Ive seen the transmission alone sell for $4k, Ive seen heads and rockers (in worse shape) sell for $2k... I bought this engine for my 64 Plymouth (also listed in the car section) before I realized it already had a Max Wedge Block in it... Not that it really matters, Why I'm selling, but I took out a loan to buy my "dream car" a 71 Cuda, so the car and the engine need to go...
 
Anyone that would like more info, please contact me, I've been in the Mopar scene 27 years, Been on Moparts since the beginning, I'm not looking to burn anyone as the OP suggested, just want to sell my parts and car. I assume he was upset I didn't want to trade for his Hemi parts.
 
I'm sorry to have seen this for sale posting of yours get all muddied up, with "commentary" in reply postings.
I shouldn't even have been posting in this reply.
But, FYI.
You can have a moderator "clean up" this post by clicking on the "REPORT" icon at the bottom left of the page, and tell the moderator what you want done.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top