• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Modern Bullitt build

IMO to date there has never been a more stylish beautiful car built. And you have taken it to the next level sir.
 
This car, when done, should go to SEMA or some other nationally recognized show. I think it would do incredibly well. It is an amazing build!
 
Fuel tank along with supply and return fuel lines are install!


BF174536-CDE6-4977-9815-7309-D4-CC3-DAA.jpg



D7-DDECF0-5-ED9-4-DD4-9-DAB-C1968-FD2-E8-BF.jpg



B0-D302-B4-D3-AF-4-CEE-9-E34-306174-A52-AD0.jpg



4-CD7446-D-8024-4674-A749-93-EDD20775-CA.jpg
 
I also installed the rear. Shooting to put the engine transmission & front suspension in the car over the weekend.

Thanks

Pat


2-E99-E5-D0-F44-A-451-C-83-D5-25-E59-AFFC6-FF.jpg




B752-FC65-F71-F-4-F2-D-9436-41-FCAB3-B6-BA6.jpg



9-E27-E1-B1-F58-E-48-F6-86-BE-C6-E1970391-BB.jpg



F4-B97741-9-D32-4532-8147-CA34-E0-E30-E3-C.jpg
 
Only 1 spot for a temperature sender on this gen3 Hemi, and I need two, 1 for the fuel injection and 1 for the gauge. I had to remove a freeze plug and make a plate that I could drill for an additional temperature sender.


I also have all of the wiring set and ready to enter and pass through the firewall through a split grommet. This will allow all of the plug-in connectors to pass through a single 2 1/4” hole hidden just above the transmission.

Thanks

Pat


4182-D0-B8-375-B-4-F1-E-B111-702535-D9-BA9-E.jpg



8-FF56-ACE-83-A6-432-A-A8-A5-D181-A7716-BD0.jpg



8400-C83-E-F6-AE-4-F5-D-AA3-B-17-B83-B59-EE70.jpg



31-C5-E003-3-C02-4260-AE69-6-EF29796-EC6-D.jpg



67912-D2-F-C3-C2-402-D-A855-EC8-CD2-A500-AC.jpg



47-FA3-FE1-5482-4766-9162-1-E66-CB104757.jpg
post pictures 4182-D0-B8-375-B-4-F1-E-B111-702535-D9-BA9-E.jpg
 
Everything executed on this car is absolutely impeccable!

The only problem you will have is that you won't be able to lose something like 7 hubcaps during a car chase!!! :rofl:
 
The thermostat housing can be drilled/tapped, weld a bung into the radiator tank but your idea should work just fine.
 
Your attention to detail and flawless execution is unparalleled Pat!! This thing will be a trophy winner everywhere! Hopefully you have plans to show it off after it’s finished.
 
Auto Transport Service
Back
Top