• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Photo Request - Steering Column Support Brackets

Detroit Iron

Well-Known Member
Local time
12:22 AM
Joined
Jul 30, 2008
Messages
436
Reaction score
215
Location
Bay Area - California
I'm looking for a photo of the brackets that are behind the dash that support steering column. My friend didn't document before disassembly. I think any '68-'70 B body will do. Thank you.

IMG_2153.JPG IMG_2154.JPG
 
upload_2020-1-4_18-41-41.jpeg
images?q=tbn:ANd9GcQJFbLQoOWj_M2KGYbEIK00_WQTHSuxtUZ-kTaKBJFQrwqJ1jNT4Q&s.jpg
4 bolts on bottom bracket
 
What angle are you looking for? I have the dash frame here. But it's not in the car. So I can only get a shot from the frame area not attaching to the car. Let me know.
 
Ok my man give me a minute. I have to resize them first. Be right back.
 
Here you go I hope this helps. You should be able to see where the rods go. Then put them in the correct orientation and you should be able to figure out the rest. Let me know if you need any certain angles.

brake bracket 3.JPG brake brackets1.JPG brake brackets 2.JPG
 
Am I missing a rod?? Automatic car eh PLUMHEMI ? Auto brake pedal.
 
Here are some from my 69 Bee. It's a 4-soeed setup, but the whole right side would be the same as an auto.

20200105_125659.jpg 20200105_125717.jpg 20200105_125735.jpg
 
Auto Transport Service
Back
Top