• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND 1964 Polara Front Turn Signal buckets

Status
Not open for further replies.

Dan64

Well-Known Member
Local time
12:28 AM
Joined
Dec 27, 2018
Messages
1,872
Reaction score
2,410
Location
East coast
Feedback: 3 / 0 / 0
Have front bumper and nothing else for front turn signals . Can get repo lenses but need the rest. Please pm me here , Dan.
 
Hard to find with the studs still attached. I may have a set that would need new studs installed. I can check later in the week if no one has a set with them and your interested. I found one Nos assembly in 30 years I have owned my car...
 
Hard to find with the studs still attached. I may have a set that would need new studs installed. I can check later in the week if no one has a set with them and your interested. I found one Nos assembly in 30 years I have owned my car...
 
Sure ,if you can find them that would be great. Thanks
 
Did you ever get a set? I found mine..
 
I'm still looking.
Ok Thanks. Now dark and snowing here and I will be heading out soon. That being said I will get some pics for you tomorrow...
 
I going to look at a set Saturday. Will update then. But if you find some before that go for it. Not sure about this guy I'm dealing with maybe full of crap. But I will let you know.
 
Here they are...I don't have the backing plates or screws for lenses.. The backing plates should be found easily as they don't break. I took these apart decades ago 1987 to be exact. I got the studs out, then found a set with good studs and threw these in a box. Used the screws and backing plates for my car and never looked at them again. Wiring is good, Lenses are good driver quality one chip in lower screw hole but will not effect using it and only the housing has a scrape right in the top/middle. $65 shipped to you if interested..

IMG_1878.JPG IMG_1879.JPG IMG_1880.JPG IMG_1881.JPG IMG_1882.JPG IMG_1883.JPG IMG_1884.JPG IMG_1885.JPG
 
Here they are...I don't have the backing plates or screws for lenses.. The backing plates should be found easily as they don't break. I took these apart decades ago 1987 to be exact. I got the studs out, then found a set with good studs and threw these in a box. Used the screws and backing plates for my car and never looked at them again. Wiring is good, Lenses are good driver quality one chip in lower screw hole but will not effect using it and only the housing has a scrape right in the top/middle. $65 shipped to you if interested..

View attachment 892292 View attachment 892295 View attachment 892298 View attachment 892299 View attachment 892300 View attachment 892301 View attachment 892302 View attachment 892303
your inbox is full
 
your inbox is full
Pm box cleared..
EDIT: Sorry thought you were the OP these are available to him first once he sees them...
 
Last edited:
Lamps are Sold. Thanks Dan64
 
Status
Not open for further replies.
Auto Transport Service
Back
Top