• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

max wedge dimensions?

barbee6043

Well-Known Member
Local time
12:04 PM
Joined
Sep 28, 2008
Messages
2,554
Reaction score
2,473
Location
S E Texas. Shepherd, texas
I bought a sheet of 20 ga.( finally after XMas is over with) and I am fabricating the 66-7 hemi scoop, but I also want to try a max wedge scoop also. Can someone send me the basic measurement of the maxie scoop, length, width and height?? The details of where the middle indentions are etc. I promise to post the results of both scoops when done!!
I realize the good repops are only about $200 ( plus postage)! but I want to try this. $34 4 x 8 sheet, and my time, (I work for free on my old Mopars, right!!?). Thanks!!
 
Thanks for the help^^^^, I found out all I need. If I like how it all turns out, I will get a sheet of .040 aluminum and try that! The 20 ga. mild steel plate is pretty light though.
 
I bought a sheet of 20 ga.( finally after XMas is over with) and I am fabricating the 66-7 hemi scoop, but I also want to try a max wedge scoop also. Can someone send me the basic measurement of the maxie scoop, length, width and height?? The details of where the middle indentions are etc. I promise to post the results of both scoops when done!!
I realize the good repops are only about $200 ( plus postage)! but I want to try this. $34 4 x 8 sheet, and my time, (I work for free on my old Mopars, right!!?). Thanks!!
Afraid we all do. Be watching for your results.
 
whats your price point? MW scoop?

I just at to try my hand at fabbing one out of 20 ga mild steel plate. If I like what I do, I will buy a sheet of .040 aluminum. All I am out now is $35 . Still have the other half of sheet left.
Maybe I am just putting off hanging out the wife's faucet in the kitchen sink!? It is not any fun!
 
I bought a sheet of 20 ga.( finally after XMas is over with) and I am fabricating the 66-7 hemi scoop, but I also want to try a max wedge scoop also. Can someone send me the basic measurement of the maxie scoop, length, width and height?? The details of where the middle indentions are etc. I promise to post the results of both scoops when done!!
I realize the good repops are only about $200 ( plus postage)! but I want to try this. $34 4 x 8 sheet, and my time, (I work for free on my old Mopars, right!!?). Thanks!!
Good repops go for $1600 and originals go for $1500 to $2500 I sell fiberglass for $300-$325
 
Auto Transport Service
Back
Top